- #OWNERS MANUAL MY SMART TOUCH TIMER INSTALL#
- #OWNERS MANUAL MY SMART TOUCH TIMER FULL#
The touch panel accessory button icons (i.e. However, the optimal viewing in sunlight and ability to operate with no error when water covers the screen, make the resistive touch panel the superior choice in a spa pool environment. So unlike capacitive touch screens (used in mobile phones), a resistive touch screen is less sensitive and will require a slightly firmer and more definite press. Resistive touch screens work on the basis of pressure applied to the screen. A resistive touch screen has been utilized for its non-reflective surface (offering superior viewing in direct sunlight and resistance to fingerprints), and its ability to continue to function correctly with wet fingers and pools of water on the screen. Your SmartTouch features a colour LCD with resistive touch screen.
Children should be supervised to ensure that they do not play with the appliance.Ĭongratulations on your purchase of a spa fitted with the 4.3” SmartTouch touch panel keypad. Supervision or instruction concerning use of the appliance by a person responsible for their safety. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given. An adequate drainage system must be provided if the equipment is to be installed in a pit. A whirlpool spa should incorporate a water filtration system where the required level of water purity can be achieved. 
It is the installer's responsibility to ensure the floor can support the expected load of the bath or spa and an adequate drainage system has to be provided to deal with overflow water. It is the spa manufacturer's and/or installer's responsibility to select suitable loads and configure load shed settings (if required) to ensure the system does not exceed its rated maximum total load. Water temperature in excess of 38oC may cause hyperthermia (heat stress). This appliance must NOT be installed in proximity to highly flammable materials. Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12V must be inaccessible to a person in the bath or spa. 
Parts incorporating electrical components must be located or fixed so that they cannot fall into the bath or spa. To prevent electric shock hazard and/or water damage to this appliance, all unused receptacles must have a water proof seal in place. If the supply cord is damaged it must be replaced by the manufacturer, its service agent, licensed electrician or similarly qualified persons in order to avoid a hazard. Read and follow all wiring instructions when connecting to power supply. Low voltage or improper wiring may cause damage to this appliance. The appliance should be installed in an enclosure such that all electrical connections cannot be accessible to the user without the use of a tool. Suitable for indoor use only or when installed under a weatherproof spa skirt. Turn the mains power OFF before servicing appliance or modifying any cable connection. Contact your dealer or authorized service agent for assistance. Do not attempt service of this control pack. The appliance contains no serviceable parts. Earthed appliances must be permanently connected to fixed wiring (European models only). Ensure circuit breaker is rated for motor start up currents. #OWNERS MANUAL MY SMART TOUCH TIMER INSTALL#
The installer should consider the sum total load of all devices connected to the SV Series spa controller when determining the size of the power circuit and install an appropriately sized circuit breaker to suit.
#OWNERS MANUAL MY SMART TOUCH TIMER FULL#
Means for disconnection from the supply mains should have a contact separation in all poles that provide full disconnection under over voltage Category III conditions.
Supply line should be a dedicated power circuit and means for disconnection must be incorporated in the fixed wiring in accordance with your local wiring regulations.
The appliance must be connected to a suitable rated and weather protected power supply. Residual operating current not exceeding 30mA. The appliance must be supplied through a residual current device (RCD) having a rated. This article contains the following topics:ĪLL ELECTRICAL CONNECTIONS MUST BE PERFORMED BY A LICENSED ELECTRICIAN AND MUSTĬONFORM TO ALL NATIONAL, STATE AND LOCAL ELECTRICAL CODES IN EFFECT AT THE TIME OF INSTALLATION. This article is designed to provide you with the information for operating the Smart Touch touch pad.
0 kommentar(er)
